Specifications
Autofun Apocalypse is a specialist vibration-damping material for demanding car-audio installations, including competition-oriented builds. Its intended applications include floors, wheel arches, the boot and bulkhead, where panel vibration needs focused treatment.
The multilayer construction uses composite butyl-polymer layers and an aluminium foil finish with a self-adhesive installation layer. Choose it where the installation calls for a substantial damping layer, with the material profile and application matched to the panels being treated.
Multilayer material combining composite butyl-polymer layers, a self-adhesive installation layer and a tempered aluminium foil finish. Release paper protects the adhesive before installation.
Apply to clean, dry surfaces. Do not install on corroded metal. Prepare and degrease the surface with a suitable cleaner, then allow it to dry completely. Remove the release paper, press the material onto the surface and roll from the centre towards the edges to remove trapped air. Recommended installation temperature: +18 to +35°C.
Recommended treatment areas: wheel arches, boot, floor and bulkhead.
Material should be stored inside at temperature not higher than +40°С in horizontal position on a flat surface at a distance not less than 1 m from any heating systems; avoid any wet conditions and contacts with oils and direct sun.
Do not stack the materials more than 1.2m in height.
| Name of index | Value | Testing method |
|---|---|---|
| Material Thickness | 6mm | |
| Sheets per Package | 5 | |
| Sheet Length | 70cm | |
| Sheet Width | 50cm | |
| Total Sheet Area | 1.75m² | |
| Package Contents | 5 sheets 70x50cm | |
| Mastic | G-45 + KM-2 | |
| Dimension (W*L*H) | 70 x 50cm per sheet | |
| Packaging Type | Corrugated cardboard carton | |
| Package Dimension (W*L*H) | 79.5 x 54 x 3.1cm | |
| Foil (Outer) Thickness | 55µm +/-5% | GOST 17073-71 |
| Mass per m² | 9.3kg +/-10% | |
| Mechanical Loss Factor on metal plate with thickness 1mm at temperature less than +20ºС | 0.61 | DIN EN ISO 6721- 3:1994 (method-А) |
| Fire risk, burning rate | Non-flammable, <100mm/min | ISO 3795-76 |
| Durability of connection between the material and the metal surface during flaking-off | >7.2N/cm | ISO 813:2010 |
| Operating Temp. Range | -40 to +90°C | |
| Max. Temp. Intermittent | 150°C | |
| Package volume | 0.01331m³ +/-10% |